MINOLTA 130F SCANNER TREIBER WINDOWS 8

MINOLTA 130F SCANNER DRIVER DETAILS:

Type: Driver
File Name: minolta_130f_15025.zip
File Size: 39.2 MB
Rating:
4.65
68 (4.65)
Downloads: 53
Supported systems: Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10
Price: Free* (*Free Registration Required)

Download Now
MINOLTA 130F SCANNER DRIVER



Place the machine on the optional paper cassette.

Note: Place the machine straight downward onto the optional paper cassette. Get the harness through the machine, and plug the connector P Screw the rear side of the machine using two screws. Screw the 2nd cassette back cover using one screw. minolta 130f scanner

Konica minolta 130f scanner drivers

Press the cursor key to select the paper size. The following size are available: A4, A5F4 Stick a paper size label to the paper level indicator. Note: Minolta 130f scanner device counts up topages. If more pages are printed, the counter resets to zero and begins counting the new pages from that point.

Mechanical counter Relay cable Fasten the counter to the machine frame with a screw. Connect the relay cable to the P94 connector on the connection board B. Connect the other end minolta 130f scanner the relay cable to the counter's cable. Be sure that no wire is trapped when reattaching the covers.

NEW DRIVER: MINOLTA 130F SCANNER

Installation is completed. The machine will now count the number of pages it prints. NOTE: When it is absolutely necessary to touch the ICs and other electrical components on the board, be sure to ground your body. Parallel interface board Turn the minolta 130f scanner off and unplug the power cord. Attach two spacers to the Main PCB. Attach the Parallel interface board to the spacers. Screw the board from the right side of the machine frame with two screws.

MINOLTA 130F SCANNER TREIBER HERUNTERLADEN

Reattach the shield cover and option cover. Reattach the connect cover.

Miscellaneous konica minolta f bizhub

PCL printer board Attach the PCL printer board to the machine, and connect the cable to the P82 connector. Screw the left side of the PCL printer board with one screw.

Network interface board Subsidiary power unit Ferrite core Remove the left cover screw. Minolta 130f scanner the cover by releasing the two tabs on the upper side of the cover. Release the cable that is taped to the power unit, and connect it to the secondary power supply. Attach the secondary power supply.

Attach a spacer to the main board. Attach the network board. Attach the board using four screws.

compaq nw8000 network1. Manually install KONICA MINOLTA KONICA MINOLTA 130f scanner driver
hp officejet j6400 series1. Manually install KONICA MINOLTA KONICA MINOLTA 130f scanner driver
gretagmacbeth huey2. How to install KONICA MINOLTA KONICA MINOLTA 130f scanner driver using DriverMax
btgp-38kmKonica Minolta 130f Scanner Driver Details:

Minolta 130f scanner Address 0. Use numeric keys to enter the IP address. If necessary, change the subnet mask. The machine will show the Internet fax settings.Konica Minolta f Scanner Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP.

Uploaded on 4/11/, downloaded times, receiving a. Download the latest drivers for your KONICA MINOLTA f scanner to keep your Computer up-to-date.

Relevant Posts